Class targo joystick buttons

[robbie]

I'm asking this in behalf of my cousin.

The rubber covers over the buttons on the joystick have worn through or started to split, he'd like to change the rubbers so stop dust getting in and buggering up the switches. A new joystick is over £2000.

He asked his class dealer but the ones they sent are larger and won't fit.

The stick is the same as fitted to jcb, has anyone got any suggestions where to get the rubbers from?

 

[Neilmc]

hey try either david king or i have a guy who does repairs like that for me in stirling called clark electronics but they may need a sample

 

[ollie989898]

Thats the exact same joystick as on the Scorpion I think.

 

[ACEngineering]

I'm asking this in behalf of my cousin.

The rubber covers over the buttons on the joystick have worn through or started to split, he'd like to change the rubbers so stop dust getting in and buggering up the switches. A new joystick is over £2000.

He asked his class dealer but the ones they sent are larger and won't fit.

The stick is the same as fitted to jcb, has anyone got any suggestions where to get the rubbers from?
View attachment 795076

Cant buy any parts for them sticks no matter who's machine its fitted too.

 

[robbie]

Cant buy any parts for them sticks no matter who's machine its fitted too.

That's pants, so they expect you to buy a new stick at two grand for the sake of a tuppence rubber or switch.

 

[ACEngineering]

That's pants, so they expect you to buy a new stick at two grand for the sake of a tuppence rubber or switch.

you could buy a cheaper version from CNH think there about £500ish and have several buttons in them? some yellow/orange and red ones I think?

IMO I think the switch is still sealed anyway even though the rubber is gone I think that's just more cosmetic?

 

[lexion780tt]

There easy to get out pop out the front with a screw driver wires are long enough to cut and solder new switch on to without having to dismantle joy stick RS components do one that fits

 

[Robert K]

I remember JCB wanting a small fortune for a new joystick as they don't sell the buttons as Ace engineering says

 

[Timbo]

There easy to get out pop out the front with a screw driver wires are long enough to cut and solder new switch on to without having to dismantle joy stick RS components do one that fits

Got a Link??

 

[lexion780tt]

https://uk.rs-online.com/mobile/p/push-button-switches/3731656/

 

[Fraserb]

Joystick on our 3cx lost the cover from the switch and makes it difficult to press, you cant buy a new switch but can get the top half of the stick with a switch, so its basically a lump of rubber stuck to a bit of metal and a push button switch, £500 they wanted, £1 superglue solved the problem