Cleaning up a fergie

[Mursal]

Oh and give the lift pump a few pumps (see will it go hard) with the little lever on the side, just in case you have a bit of air, worth a try .......

 

[Loftyrules]

Legends thanks, started no bother, had been doing it wrong.

Is this the excess fuel button? Assume it’s pushed in to start

 

[Mursal]

I forget, but have a play with this see can you get it to click in

 

[Loftyrules]

Cheers @Mursal thats the same sort of thing as mine

Here she is running (short video) scrap that it won’t work

 

[tomlad]

Legends thanks, started no bother, had been doing it wrong.

Is this the excess fuel button? Assume it’s pushed in to start

Hi . Yes thats the button
Press in . Click . If u pulled . Pull to stop it would pop out . Click .
If the button hasnt bin used it can stick . Go easy .....
Lots of lube wd 40 ..
Once engine fires it will reset the pump to the throttle setting .
Bets theres a vid on u tube ?
Pumps on fordsons is what @Mursal is thinking similar but different.
Buton in is full fuel / full throttle untill it automatically resetts to hand throttle setting . If u get me ?

 

[Loftyrules]

Ok so I have a few bits that I’ve inherited or blindly purchased at auctions for the pick up hitch. Which bits are any use and which bits are pointless and what else do I need?

 

[tomlad]

first pic bottom part of fergie puh
but might not b for te20 may be mf 35 65 ...

red t bar looks like mf tee bar not seen one quite like that b4 does it fit on the fergie? or mf 35 65 tee bar for te20 has a ally domed button to release looks like a mushroom

third thing new to me ? 4 bolts look like bolt holes under pto for the hook to bolt too ??

presumably forth is ur tractor , if u remove one side can u get the hook to fit in ??

 

[tomlad]

te -20 need the lower arms held just below highest point for external oil , if they get to top no external oil .
that's one of the tee bars jobs , also two stay bars link to hook to lift /lower it .
will be something on u tube ?

 

[SMID]

The third bit is the front bracket for a mil loader afraid it wont be needed .It would be nice to keep a genuine tractor like that right with a button type t bar as @tomlad describes.

 

[tomlad]

Fergie puh tee bar please excuse the colour

Push button to lower

 

[Loftyrules]

Thanks guys

Assume you use that one @tomlad

 

[tomlad]

Part of the empire of shite

 

[Loftyrules]

If you ever need to clear up the empire let me know

 

[Ley253]

Legends thanks, started no bother, had been doing it wrong.

Is this the excess fuel button? Assume it’s pushed in to start

Hi, it was on ours, and I have just found a photo of a new recon pump, and its still there.