Compressor connector help

[Alan88]

Would like to add an airline to the compressor that's used with the milking parlour. So we can inflate wheels and blow down the condensing units. The line for the milking parlour comes out the end but the old compressor had a second line on top that I was able to connect a hose to for those jobs.

Thanks

 

[milkloss]

This?

 

[Alan88]

Yea but there's no where to put it is my problem.

 

[Andrew]

Yea but there's no where to put it is my problem.

Disconnect the line that goes to the parlour. Fit T piece. Reinstall line to the parlour.

 

[Netherfield]

Or take the bung out of the other end of the receiver,get a reducer and fit your airline to that.

Or send a better picture of the right hand end of the receiver where you're connected already.

 

[Fergieman]

Get a fitting to fit either off the 2 marked ports. Usually the fittings are connected to the top fitting. Any good ag supplier will get you the fittings or several places online supply them.

 

[joe soapy]

go into lidle or aldi, get a few packs of their connectors, take bung out of tank and get it drilled and tapped for the connector tread,

 

[Netherfield]

Don't try connecting to the top marked port, there is a non return valve connected there.

 

[tomlad]

On my big compressor that non return valve get stuck open with black lumps of
crap , must come of compressor its self looks like carbon
Have to strip ,cleen , regularly