Connix wireless lights problem.

[bcharolais]

I have just purchased a set of connix wireless light for use on my scotpen race trailer but when use them on my 2016 ford ranger they work with just the brake lights fine but as soon as use indicators or side lights they start of ok then quickly start to flash rapidly. Truck is fine on the ivfor williams. Also they work great on other machines any ideas please. It is also the new updated version with new type plug.
Thankyou.

 

[Mur Huwcun]

Have you tried the truck on any other LED lights?

 

[Jim75]

My L200 used to do that aswell, fine on other trailers. Must be a Connix issue

 

[Timbo]

It is because the sender unit that you plug in does not present a 21w load to the truck and it assumes you have a bulb blown.

 

[bcharolais]

Have you tried the truck on any other LED lights?

I have run one set but beleive they had a resistor wired in. Thankyou

 

[Marky172]

Are they a fix for the above I have a L200 series 5 only the lights work

 

[Aspiring Peasants]

I have just purchased a set of connix wireless light for use on my scotpen race trailer but when use them on my 2016 ford ranger they work with just the brake lights fine but as soon as use indicators or side lights they start of ok then quickly start to flash rapidly. Truck is fine on the ivfor williams. Also they work great on other machines any ideas please. It is also the new updated version with new type plug.
Thankyou.

They don't work on Rangers had the same problem.