YELROM
Member
- Location
- North Yorkshire
Might have the chance to buy this HGV lowloader to convert to tractor drawn but think the axles are a bit far back, the centre of the rear axle is 5’ from the back of the trailer and the axles are on 4’6”centres.
If I cut the swan neck off and had it as a 30’ flat bed would it over load the tractor draw bar with a 13t excavator on.
Anyone have an idea what it might be worth it is 2001 and looks shabby but is still mot’d
@Andrew would you have any idea as you post on a lot of trailer threads