CR9070 Feeding

Flatlander

Member
Arable Farmer
Location
Lorette Manitoba
Like any rotary combine the intake ’elephant ‘ ears wear and twirl the straw rather than grab it and pull it in. Long tough will be worse. Take a look at the transport vanes inside the tubes if they have adjustments to speed up or slow the flow axial flow combine you could get the crop to go around more time by adjusting the angle. The vanes would wear Down and this may be your problem.
 

del_boy

Member
Location
Herefordshire
I think the ones with the intelisense systems is where they become electric adjusted.
Ive only ever altered them once and never saw any benefit so they get left in the fast position now, being a short ass i find them very difficult to alter.
 

Secret Agronomist

Member
Arable Farmer
Its not the vanes that are the problem, the rye was wrapping round the shaft just behind the bearings and it was smoking and burning, the grease in the bearings has melted so we are putting new ones in today but I think it needs new elephants ears.
 

Flatlander

Member
Arable Farmer
Location
Lorette Manitoba
If it’s wrapping around that point it’s the elephant ears are worn and new ones should help. The clearance should be minimal but dealer should know the spec. Not sure on the inside details of a new Holland but I may help to have The auger extensions removed if you are using them from the header. Keeping the feeder house sides fuller than the centre could help crop flow inside. I doubt with heavy long rye that possible but might be worth looking at the auger.
 

New Fuel Supplier On The Way

  • 257
  • 2
Farmdeals is very pleased to announce that Exswift Limited will soon be joining our digital online platform. Exswift deliver all types of fuel to numerous locations around Essex and further a field. We will keep you updated as to when they go live. Farmdeals.ag powered by The Farming Forum & FutureFarm. #farming #workinghard #inittogether

Exswift lorry2.jpg
Top