Cutting out a new interior

sh40

Member

Thinking of buy a roll of this cab trim and redoing the inside interior on the mud guards myself.

Its for a same leopard with a siac cab similar to the link below. https://www.donedeal.ie/tractors-for-sale/same-90-leopard/23133927

Original cladding can't be got new for this cab and I don't have the old cladding to work off as it was torn outward ago. Has anyone advice on how best to do it?
 

How much

Member
Location
North East
Not sure if the sparex stuff is self adhesive or not I suspect not but fitting it should be easy enough if a little fiddly.

preparation is key getting the old cladding off, making sure the inner panels are reasonably clean and smooth and that the there is no dut etc on them , strip out as much interior as you can , the seat for sure plus any levers that can be taken off will make it easier .
just use spray adhesive the "high temp type" they are very commonly available from the likes of ebay its just an aerosol can spray in on both surfaces and it will stick no bother at all

just working out where to put the joins is a faf and how to cope with radius etc , make up some paper templates to try out your theory . it will wrap around 90 degree corners without any issues but hiding the foam edge will be the tricky so limiting how many edges you have is a good plan this video explains exactly how to do it


but most importantly take your time and don't rush it for best results
 

Will you help clear snow?

  • yes

    Votes: 68 32.2%
  • no

    Votes: 143 67.8%

The London Palladium event “BPR Seminar”

  • 8,524
  • 120
This is our next step following the London rally 🚜

BPR is not just a farming issue, it affects ALL business, it removes incentive to invest for growth

Join us @LondonPalladium on the 16th for beginning of UK business fight back👍

Back
Top