glasshouse
Member
- Location
- lothians
Done it beforeLove to put that procedure on a method statement, !!
With a 9m telehandler and a 30ft pole
Method statements werent thought of then
Done it beforeLove to put that procedure on a method statement, !!
who puts the nails in the trough?Are the nails through the ridges or troughs? If the later the tin will be tight against the purlin with no real space to get in to cut the nail
Sure I've seen it done like that before on tin sheets, I know on cement fibre the nail goes through the ridgew
who puts the nails in the trough?
The man that did thisw
who puts the nails in the trough?
The man that did thisView attachment 1036209 think it's because when you're screwing them down you distort the ridges.
Cement fibres more ridged View attachment 1036210
The man that did thisView attachment 1036209 think it's because when you're screwing them down you distort the ridges.
Cement fibres m
screws on box profile fetch out with buzz gun!The man that did thisView attachment 1036209 think it's because when you're screwing them down you distort the ridges.
Cement fibres more ridged View attachment 1036210
I believe he is not wanting to work above the roof but below from the insidescrews on box profile fetch out with buzz gun!
european profile it goes in the troughSure I've seen it done like that before on tin sheets, I know on cement fibre the nail goes through the ridge