yes or if you dont mind cutting the centre out of the old steel wheel then drilling that and using as an adaptor between the 2 ? will save drilling the 4 holes that fit the hub that's all.
David brown A type plough
- Thread starter tomlad
- Start date
- Location
- 200 miles N,NW of New York
tomlad
Member
- Location
- nr. preston
Old rim bit rotten, the are a sandwich on these ,both sides of the hub . Then presumably riveted.
i think i would be inclined to use yer plate, drill it to be able to bolt to the hub then weld the plate to the wheel. getting central before of course. few short beads would be string enuogh and not distrort the wheel like a continuous bead all dine with the tyre on the rim......
sort of job i like
sort of job i like
tomlad
Member
- Location
- nr. preston
Gonna have a chat with mate who i think can plasma cnc it .i think.
Thick plate is ballast isn't it , but probably not on plough frame to help ?
Thick plate is ballast isn't it , but probably not on plough frame to help ?
tomlad
Member
- Location
- nr. preston
Looking for a arm / bracket from depth turnbuckle to the wheel assembly round bar .
I have one on another plough but then have to share . About 12" long pin one end, clamp bolt other. Probably cast . One on spare looks home made
Got the spacer plasma ed out.
I have one on another plough but then have to share . About 12" long pin one end, clamp bolt other. Probably cast . One on spare looks home made
Got the spacer plasma ed out.
Last edited: