David brown double spool valve

[Andyt880]

I'm after an original double spool valve for a DB selectamatic. It needs to be from a single pump tractor so something like an 880 or 990, not from a 1210 etc. Any body got one lying around that would be for sale? I'll attach a photo of one I found on google images.

@Selectamatic
@John1694

 

[Andyt880]

 

[Andyt880]

There is actually two spools on that one. I could live with just one. I need the plate that sits under them too.

 

[Andyt880]

I'm not sure. I would need to check the pattern of the bolt wholes to see if they match. The spool valve replaces the 'camels hump' which is beside the lift quadrant on a selectamatic brown. My understanding is that there is a live feed up to where this 'camels hump' is and it then feeds the spool valves when put in place. I'm no expert on the matter.

 

[John1694]

The spool valves are all the same basically from 880 to 1694, but if fitting to a tractor with pump in pto housing you need a base plate adaptor, the front pump tractors have the base already fitted basically. I'm out of stock of spools at moment but do have base adaptors if need 1 call me 07706880714, I can point you in direction of a spool valve as well I'd think

 

[Andyt880]

Thanks John. I'll give you a call tomorrow!

 

[John1694]

Texting may work better as I'm hard to get hold of haha

 

[Andyt880]

That's grand! I'll be in touch.

 

[Selectamatic]

@Andyt880 I'm in the same boat as you!

@John1694 If you have some base plates spare, I'd be interested, but not if it means stepping on @Andyt880 's feet, let him have first dibs.

Let me know if you have any spare....

 

[John1694]

I have 2 bases, £50 each plus vat and carriage thanks.

 

[Selectamatic]

I have 2 bases, £50 each plus vat and carriage thanks.

If @Andyt880 is happy with one, I'll have the other!

If he does not want either, I'll have both!

 

[Andyt880]

Yea I only need one!

 

[Selectamatic]

Done!

@John1694 can you PM me your name and address, I'll put a cheque in the post, or pay by bank transfer / paypal / Welsh union money retention, whatever suits...

 

[Andyt880]

Like wise @John1694 Iv sent you a text message.
Thanks guys.

 

[John1694]

You have my number, get in touch if want it

Done!

@John1694 can you PM me your name and address, I'll put a cheque in the post, or pay by bank transfer / paypal / Welsh union money retention, whatever suits...

View attachment 608308

ou

 

[Selectamatic]

You have my number, get in touch if want it

ou

Do I?

 

[Selectamatic]

You have my number, get in touch if want it

ou

I don't think that I do, unless we know each other?

They will fit a 880 or 990 without being modified, wont they? Are they original ones?

 

[John1694]

My number is on this thread if you look above. Yes, these are bases off tractors with front mounted pos that I have modified to fit 990 etc. Andy I think wants both though possibly but it's first come first served, I keep parts for nobody as I've been let down too often

 

[Andyt880]

No I only need one. Your welcome to the other one @Selectamatic

 

[Ray996]

My number is on this thread if you look above. Yes, these are bases off tractors with front mounted pos that I have modified to fit 990 etc. Andy I think wants both though possibly but it's first come first served, I keep parts for nobody as I've been let down too often

Do you break a lot of browns? Always looking for spares!