DB 885 wiring

[REStracTORATION]

This any use? Don't know if it's for the DB or Case version but can't see them being much different..........
http://dbtc.co.uk/mediashare/8y/bw29etatkkmqwuc88rf6ebdvzi3a6y-org.jpg

It should zoom in quite clear....

Dam you beat me to it

 

[Servac]

I have pdf of 1978 manual for selectamatuc electrical system with both alternator and dynamo if it helps? Can send it via PM if you want.

 

[agrimax]

That is a very complex version for a cabbed model

Aha,but what's the difference? Come to think of it,it's not for a cabbed model as there's no windscreen wiper circuit in it.

 

[jamesfalky]

Try this
https://goo.gl/images/xuVvZd

Also from memory the QTP looms didn't fit our tractor that was a few years ago so problem might have been fixed now worth a try.

Our last loom as a quick cheap fix was from agriline but this was for a 780 fitted ok.

Being the dynamo model, it shouldn't be far off being the same as the 780 loom should it not?

 

[REStracTORATION]

Being the dynamo model, it shouldn't be far off being the same as the 780 loom should it not?

780 is just a bit shorter basically the same

 

[Mursal]

Would you not get it charging and work from there?
Are you OK wiring a 2 bobbin regulator?
If so after that is only lights and gauges?

 

[Selectamatic]

Find yourself a handbook, make sure it's the right model for your book, i.e. not a Q cab.

You can find them often enough on ebay.

In there is a wiring diagram, as well as everything else you need to know about your little tractor!

If your proper stuck, I could take a photo, or scan the right page for you.

 

[Mursal]

885 wiring diagram click

 

[Exfarmer]

Aha,but what's the difference? Come to think of it,it's not for a cabbed model as there's no windscreen wiper circuit in it.

There is a connector block which I dont think is present in the uncabbed. Think windscreen wiper was an optional extra!

 

[Mursal]

Simplified two bobbin regulator wiring diagram to get it charging for you.
Hope this helps ..........

Note:
Only thing you haven't got is the charging warning light, so earth if off the D on the dynamo and give it power from the ignition switch. You will see it in the Dynamo wiring diagram in the previous link (second diagram down) Wire 7 .........

 

[Exfarmer]

Thats more like it , then a power feed from thr battery / starter motor to the light switch and then to the lights, simples.