Derv doctor increase possibility

[Timbo]

I “spoke” to him yesterday x4 times via email so he’s not in hiding.

Spoke on messenger also. There are folk who are just time wasters so one learns who to ignore quite quickly...

 

[TripleSix]

Company inquired too seem to have a good reputation and do dyno before and after . Was hoping for some positive feedback there must not be as popular as we thought

Where in Yorkshire are you?
Independent mechanics close to Northallerton have started offering Dyno based remaps.
You'd have to have the tractor in their yard though.

 

[whiteford]

I can also confirm his remaps are good, had a 6830 tuned to the moon 7 years ago, mostly drive it like it's stolen and ring it's neck on the plough and cultivator. Never had a problem so far.

 

[RH15LEW]

I can’t seem to get a date from him at all, numerous emails and fb messenger but can’t get anything in concrete

 

[shumungus]

As regards the JD and remapping, I know a contractor well who has a green fleet, 145's and 155's all sitting around 200hp except the bosses one that's at 240hp. Haven't known of them to have any bother other than the normal niggles. These tractors are bought new and sold at three years old with around 8000 hrs on them.

 

[Rs chunk]

I have a 6930 here been remapped by derv doctor haven’t had any issues since, I sent my ecu too him by post and got it back 2 days later with a blanking plate for ecu. Never been on a dyno since but performs well

 

[copse]

I have a 6930 here been remapped by derv doctor haven’t had any issues since, I sent my ecu too him by post and got it back 2 days later with a blanking plate for ecu. Never been on a dyno since but performs well

What do you mean by a blanking plate ?

 

[davidroberts30]

What do you mean by a blanking plate ?

Egr blank

 

[Rs chunk]

What do you mean by a blanking plate ?

Where the pipe that crosses over engine from the exhaust manifold to the manifold where egr sits you undo 2 bolts an put a thin metal plate under end of pipe and bolt it back down and that stops the exhaust gas entering the egr valve. Part of the remap then stops egr vale working or putting up fault codes

 

[Rs chunk]

Egr blank

Yeh that’s the simple short answer I didn’t notice I hadn’t said it was for egr

 

[Goffer]

Many thanks to u all , have got hold of him and is going to ' doctor' it for us .

 

[BuskhillFarm]

You’ll not regret it. Posted mine to him. Just software Rs don’t need blanking plate. Runs much cooler. Wasn’t worried about power but it’s nice to have the little extra

 

[shumungus]

Let us know when its done how you get on.

 

[RH15LEW]

Many thanks to u all , have got hold of him and is going to ' doctor' it for us .

How did you get hold of him? He’s got all my details just can't seem to get him here!

 

[Goffer]

How did you get hold of him? He’s got all my details just can't seem to get him here!

I dialled his no. And he answered

 

[RH15LEW]

I dialled his no. And he answered

Old school it is then

 

[Spud]

Give him a ring, tell him what you want, he has different maps for different results, and he does the development work on a dyno, he's done several for me with no issues and one is on big hrs now.

What do you call big hours?

 

[Blue.]

The 20k+ hr jd 6830 was remapped early in its life by the dd without any problems,it’s been mentioned on here before.

 

[fieldfarmer]

What do you call big hours?

7530, 13'500hrs,

 

[Weare Cham]

https://tractortuninguk.co.uk/