deutz 5 series isobus problem

[suffeks]

anyone have a deutz 5 series with isobus? i have a problem where my terminal is unable to pickup the speed, tested the terminal in a 7 series it works fine

the dealer replaced all the electronic wiring, along with the isobus ecu and main ecu, still nothing, there is nothing else left to replace! getting annoyed

was wondering if anyone else has the same problem

thanks

 

[Robt]

Imonitor??? If so we are uk support for Agrosky project.
PM me your details so we can help

Sorry you meant the ISO socket I'm can for ground speed? I still may be able to help

 

[suffeks]

no the 5 series never came with imonitor, i have an aftermarket screen, imonitor was 6 and up

 

[Robt]

Which screen? Feel free to call me 07788292441

 

[suffeks]

i have the mueller touch 800, sorry i'm not in the uk anyway, its not a problem with the screen because it works in other tractors, there is something wrong with my tractor, and i was wondering if anyone else had the same problem, dealer has been trying to fix it for 6 months now... they had a tech come from the factory even and no luck

 

[Robt]

Are you trying to pick up ISO speed from ISO socket in cab? No worries hope your dealers can get it fixed ..... Eventually

 

[suffeks]

yes exactly, i choose the option wheel speed via can, no success, radar via can also does not work, for now i'm stuck with using gps speed

terminal also doesnt get the rear lift position

but i can communicate with isobus implements just fine and control them, ie: the amazone ZAV, everything else works, just not the speed from tractor sensors or rear lift position

 

[Wombat]

Does it have the Isobus plug as fitted in the factor on the back or was that fitted with the mueller terminal?

 

[suffeks]

the in cab and outside rear isobus plugs were from the factory, the terminal i purchased myself after i got the tractor

i think someone was having a bad day at the factory, because the first thing i noticed was the rear 12v plug was reversed + and -, i fried 4 phone chargers, so this lead me to buy an isobus terminal early while the tractor was still under warranty, and guess what, isobus isn't fully working... my suspicion was right

 

[Robt]

What's wrong with GPS speed?

 

[Robt]

Why buy a Muller terminal rather than an imonitor?

 

[suffeks]

gps works fine, but the point is tractor should be outputting speed but its not, so i would like that fixed

 

[Wombat]

Does it actually have a TECU in the tractor to put those messages on the Isobus or is it just the wiring?

 

[suffeks]

i dont know, i assume so, since deutz keeps replacing wiring harnesses and ECUs, but thats why i'm looking for another person with a 5 series to confirm they have speed showing in isobus or not via aftermarket terminal

 

[GPS_Support_2014]

Normally for ISO speed you need a TECU installed. The TECU "translates" the speed from the Deutz CAN network and broadcasts it on the ISO network.

The dealer should be able to confirm if there is one fitted.

 

[suffeks]

ok thanks, i assumed it was a standard thing, so the question now is does the 5 series come with TECU...

 

[Pheasant Surprise]

Understand you have tried your terminal in other machines but have you tried another terminal in your tractor? Looks like 5-series all have TECU installed if wired from factory with ISOBUS.

 

[suffeks]

no i havent, but i want to find someone else with a 5 series and try my terminal in that

 

[Pheasant Surprise]

no i havent, but i want to find someone else with a 5 series and try my terminal in that

Dare say it will be a heck of a lot easier to find another ISO terminal than another 5-series in close proximity.

 

[suffeks]

bump

still no luck with this, i got in touch with the head tech at deutz, but they arent very enthusiastic about solving my problem, also havent found anyone with a 5 series with isobus