Deutz-Fahr mp130 error 05

Wanya

New Member
Please if anyone can help me for Deutz-Fahr mp130 i am getting error 05 when i start it
and if there is a way to reset it set it up from beginging
thanks in advance
 

Boohoo

Member
Location
Newtownabbey
My control box looks like this i dont know how to reset itView attachment 885052
That's different to the control box that I had, mine was like the one in the manual I linked to above. Your baler could be a later model or could've had a replacement box. The 130 was replaced by the 135 and the Vicon RF was the same baler but had red panels instead of green.
 
That's different to the control box that I had, mine was like the one in the manual I linked to above. Your baler could be a later model or could've had a replacement box. The 130 was replaced by the 135 and the Vicon RF was the same baler but had red panels instead of green.
Different to the one I had as well on mine the reset sequence was written on bottom of box
 

Galcam

Member
That is a Bio control unit showing the power up screen. On a bio that screen appears for a max of 6 seconds before it times out and the screen will now show the same screen but with an X in the link between the monitor and the Baler ECU if the correct communication are not established. Otherwise the GUI to control the Baler will be displayed on screen. I wonder has someone given u the wrong monitor?
 

Wanya

New Member
Thanks guys for fast answrr i will go try to reset like your picture show meaby i be lucky
and buy the way what belt you guys have on net cutter i cant find anywhere in manual
 

Wanya

New Member
That's different to the control box that I had, mine was like the one in the manual I linked to above. Your baler could be a later model or could've had a replacement box. The 130 was replaced by the 135 and the Vicon RF was the same baler but had red panels instead of green.
this baler is 2002 model atleast seller told me so
 

Boohoo

Member
Location
Newtownabbey
this baler is 2002 model atleast seller told me so
Is the baler new to you? If it is I'd contact the seller because I'm pretty sure you've got the wrong control box. I looked at the newer 135 and 235 models and they use the same control box as in the picture from the operators manual above.
 
Last edited:

Forum statistics

Threads
192,258
Messages
4,398,697
Members
48,189
Latest member
benlindsay

NFU Scotland looks to find the next climate friendly farming champion

  • 32
  • 0


Written by William Kellett

NFU Scotland has started the search for Scotland’s climate friendly farming champion.

Hosted by NFU Scotland’s Next Generation group and supported by Royal Bank of Scotland, the competition is encouraging Scotland’s farmers and crofters to take to video to outline the steps they are taking to reduce emissions and deliver wider environmental benefits.

The panel of judges will now include Ben Macpherson MSP, newly appointed Minister for Rural Affairs and the Natural Environment; Claire Taylor, political affairs editor at the Scottish Farmer; and NFU Scotland’s Next Generation Chair Peter Moss.

Those entering NFU Scotland’s competition will have a chance to win a...
Top