Deutz-Fahr mp130 error 05

[Wanya]

Please if anyone can help me for Deutz-Fahr mp130 i am getting error 05 when i start it
and if there is a way to reset it set it up from beginging
thanks in advance

 

[Boohoo]

Error codes are listed in the operators manual. If you haven't got one you can download it from the Kverneland website

Quest - Quest.Client

 

[Wanya]

Boohoo thanks very much you save my life

 

[Zebbedee]

If you look on control box front is there not a sequence for reset eg buttons to press etc

 

[Wanya]

My control box looks like this i dont know how to reset it

 

[Boohoo]

My control box looks like this i dont know how to reset itView attachment 885052

That's different to the control box that I had, mine was like the one in the manual I linked to above. Your baler could be a later model or could've had a replacement box. The 130 was replaced by the 135 and the Vicon RF was the same baler but had red panels instead of green.

 

[Boohoo]

My control box looks like this i dont know how to reset itView attachment 885052

Thinking about it some more, that looks like a control box for a Bio. What happens if you hold the toggle switch over to C?

 

[Zebbedee]

That's different to the control box that I had, mine was like the one in the manual I linked to above. Your baler could be a later model or could've had a replacement box. The 130 was replaced by the 135 and the Vicon RF was the same baler but had red panels instead of green.

Different to the one I had as well on mine the reset sequence was written on bottom of box

 

[Galcam]

Boohoo that is the box of a Taarup bio!

 

[Boohoo]

Different to the one I had as well on mine the reset sequence was written on bottom of box

Mine was like this, from the link above

 

[Galcam]

That is a Bio control unit showing the power up screen. On a bio that screen appears for a max of 6 seconds before it times out and the screen will now show the same screen but with an X in the link between the monitor and the Baler ECU if the correct communication are not established. Otherwise the GUI to control the Baler will be displayed on screen. I wonder has someone given u the wrong monitor?

 

[Wanya]

Thanks guys for fast answrr i will go try to reset like your picture show meaby i be lucky
and buy the way what belt you guys have on net cutter i cant find anywhere in manual

 

[Wanya]

i will take video of full process and post it here

 

[Wanya]

Thinking about it some more, that looks like a control box for a Bio. What happens if you hold the toggle switch over to C?

he is beeping if i hold it to the left

 

[Wanya]

That's different to the control box that I had, mine was like the one in the manual I linked to above. Your baler could be a later model or could've had a replacement box. The 130 was replaced by the 135 and the Vicon RF was the same baler but had red panels instead of green.

this baler is 2002 model atleast seller told me so

 

[Boohoo]

this baler is 2002 model atleast seller told me so

Is the baler new to you? If it is I'd contact the seller because I'm pretty sure you've got the wrong control box. I looked at the newer 135 and 235 models and they use the same control box as in the picture from the operators manual above.

 

[Wanya]

he is beeping if i hold it to the left

we have like 5 beeps in row and than it stops but after that nothing is changed

 

[Wanya]

 

[Boohoo]

View attachment 885513View attachment 885514

Making sense now!
Link to the MP130 Balepack operators manual

Quest - Quest.Client

There's a spare parts manual too

Quest - Quest.Client

And these problem solving/modification guides

Quest - Quest.Client

 

[PJL 130 baler man]

Hi there just a quick one on my rf130 the net ram keeps getting stuck up and the net keeps going in. I keep resetting it but it will keep doing it every so often. Hoping someone would be able to help me. Many thanks