Dominator 98 Advice

[Zippy768]

What starter is used on the header reverse drive. Looks to be a Bosch 472, but a Google search doesn't find that motor

 

[zero]

What starter is used on the header reverse drive. Looks to be a Bosch 472, but a Google search doesn't find that motor

Our old 86 had the same starter motor as a Porsche for the header reverse drive. It could have been a 928? But I can't quite remember.

 

[Barleymow]

mercedes om352 water pump - Google Search

The OM352 was used in many applications, certainly MBtracs, Unimogs and I'd expect small merc trucks.

At the Claas dealer I worked at we often got engine parts from a local Mercedes truck dealer.

I use Orwell trucks for engine parts for the 116

 

[Zippy768]

Our old 86 had the same starter motor as a Porsche for the header reverse drive. It could have been a 928? But I can't quite remember.

Yes, your right
Took the bosch motor into a bosch garage - didn't want to know or help getting a replacement.

Spoke to an independent guy and explained where it was from and he remembered that the Claas used a Porsche starter. He is sourcing a replacement. Well under £200

 

[zero]

Also, if you need a replacement boss for the big drive cog that the reverse motor meshes into, the boss from the inside of a Matador and possibly Senator straw walker pulley can be adapted to get you going.

 

[Eirebikes]

I just bought a 98s classic and am looking for the settings for cutting oats,i didn't get the correct manual with it.

Im also having electrical gremlins ( switched Power at both reel speed adjuster solenoids, where it should be a switched earth and no earth feed to the reel reverser switch,but cant find a wiring diagram anywhere.

 

[DrWazzock]

 

[DrWazzock]

The above chart came with my combine. Tge settings differ considerably from those in the combine manual but seem ok as a starting point.

 

[Eirebikes]

The above chart came with my combine. Tge settings differ considerably from those in the combine manual but seem ok as a starting point.

Perfect thanks

 

[zero]

On ours we used to open the concave up fairly well but not all the way so there was a bit of room if it bunged up! Drum and fan speed fairly low, and seive box slightly slightly larger gaps than the book.
The header reverser only works with the thresher in gear. I can't remember how the reel speed variator is wired up but I have taken the motors to bits to free them up as one seized up..

 

[Eirebikes]

On ours we used to open the concave up fairly well but not all the way so there was a bit of room if it bunged up! Drum and fan speed fairly low, and seive box slightly slightly larger gaps than the book.
The header reverser only works with the thresher in gear. I can't remember how the reel speed variator is wired up but I have taken the motors to bits to free them up as one seized up..

Cheers,just got to the bottom of it, broken earth wire under the seat,have much more dash lights now too. Only took 2 days ,if only i had a diagram,but i suppose i got to know her intimately now . Now for the weather