Door Frames or Perhaps Something Else............?

I have three of these, which were intended to be doors but the project was shelved. They measure 2950mm tall x 1500mm wide and are made from box section.
The long sides are 120mm x 60mm box section, one side is 3mm thick and the other is 5mm thick and was intended to to be the hinge side.
The short way are all 60mm x 60mm box section, bar the centre one which is 120mm x 60mm.
There are braces in two corners from 40mm x 40mm box.

One frame has lugs welded on which were to make it into a jig to make the others from, these are easily removed. There is some more welding to be done on this frame but it is basically complete.

Would be ideal for doors, as intended, but would also make a decent base frame, skid base or pallet for something.

Looking for £50 each for them, vat to be added and loading is available by arrangement. Collection is from Walsham-le-Willows, IP31 3BE. Local delivery may be possible required.

IMG_20201210_114928.jpg
IMG_20201210_114923.jpg
IMG_20201210_114908.jpg
IMG_20201210_114904.jpg
IMG_20201210_114857.jpg
IMG_20201210_114851.jpg
IMG_20201210_114845.jpg
IMG_20201210_114838.jpg
IMG_20201210_114832.jpg
 

quattro

Member
Location
scotland
Make another one,weld two end to end weld a sheet of steel to them drill some holes In them and sell as 1.5metre high shutters for concreting
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 78 43.1%
  • Up to 25%

    Votes: 63 34.8%
  • 25-50%

    Votes: 30 16.6%
  • 50-75%

    Votes: 3 1.7%
  • 75-100%

    Votes: 3 1.7%
  • 100% I’ve had enough of farming!

    Votes: 4 2.2%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,286
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top