glasshouse
Member
- Location
- lothians
looking for a blade to go on 180 hp tractor front linkage.
old one off a dozer would be good.
old one off a dozer would be good.
its a wilson front linkage, nice and strong with side plates to the bell housingYou will need a really good front linkage for that,preferably with a push bar to the rear of the tractor.
Nick...
Dont like them at allYou will be fine then.most linkages only fit onto front tombstone.have you looked on ebay for a blade
Nick...
Or maybe leave jaw on? Would be useful at timeslook for a 3 in 1 digger front bucket and just take the front jaw off makes a great dozer blade for the front of the tractor and all the strengthening in the bucket is in the right sopts for a front linkage
Seen one made from the dozing blade off an 8 ton 360 fitted to a Tm175 front linkagelooking for a blade to go on 180 hp tractor front linkage.
old one off a dozer would be good.
i remember having one of them.
www.ebay.co.uk/itm/Britains-Toys-Model-Snow-Plough-Tractor-Shovel-VGC-England-Dozer-/122306535665?hash=item1c7a09a0f1:g:F2YAAOSwUKxYdRfc
One here on E Bay @glasshouse , just what you need. A push bar for the back of the tractor and it's a Bomford. I've got a tractor to fit somewhere but I'm thinking it might want a tyre on!
lost nowBet you haven't still got the spacer for the 135.
Not a big job to add the axle bracing.The Wilson lift is good but depending on which breed of 180hp, I'd have the bracing to the back axle. Wilson's did/still do that option.