Drill swap anybody?

I have access to 3 disc drills and 2 combination drills and this last year has highlighted the lack of a tine based drill that can run in conditions where the disc drills can't and before the combination drills are required so if anybody out there has the opposite and wants to add a disc drill in place of a tine drill, then I am interested in a swap deal.

My offering is:
2008 Vaderstad 600S - only done 4 seasons work - not used in 2012 at all
x-pattern system disc
staggered wheels
hopper extension
new radar 2013
new control box 2013
new rear following harrow
new seeding discs
2800ha on the clock

After another 400ha the system disc and seed coulters will need replacing. The drill is in excellent condition and owner operated.

Interested in a tine based drill with full width packer ideally 6m but would consider 4m and 8m as well. It would have to be similar age and condition to make it fair but all I can say is 'lets talk' ......

07970 658813 - Warwickshire

 

[Mart]

Hi sounds like a good outfit that would suit me I have a really nice claydon in good order and same spec would suit you down to the ground!!!!

 

[warksfarmer]

Errrr no ;-)

Should of clearly stated Claydon would not be considered lol haha

 

[Clive]

Hi sounds like a good outfit that would suit me I have a really nice claydon in good order and same spec would suit you down to the ground!!!!

This has to be TFF's funniest post so far !!

 

[warksfarmer]

He's a funny man. He needs to concentrate on reaching the pedals in his tractor though......