Dust extractor fitting to pre cleaner

[dannewhouse]

We have a pre cleaner (kongskilde) which we run all our grain through before the roller mill. At the moment we have a cyclone on it to try and reduce the amount of wind that goes with the chaff as it blows everywhere. I'm thinking of a system like I have seen for bagging sawdust, any ideas, prices seem all ove when looking on eBay. Do I need a suction system? As the cleaner blows the chaff away so I only need the separation system? Air away from chaff.

 

[Robert K]

I might have something suitable

 

[dannewhouse]

What's it like?/pictures and how much you wanting? Thanks

 

[Robert K]

What's it like?/pictures and how much you wanting? Thanks

Pm sent

 

[dannewhouse]

thanks for your messages, Im wanting the bagging part rather than the fan, the cleaner blows the dust out with enough force but if I put a bin under it, it just blows 50% straight back out so dust everywhere.

I was wanting the same as above but without the fan to try.
there worth as much 2nd hand as new, a single bag is 150 ish new, over 100 2nd hand a twin unit on ebay is at 210 and rising when there 265 new! so might get this new worst case sinario I get 210 back on ebay for it!