Endurance wind power declare bankruptcy

[CNC Warranty Cover]

try [email protected] insurance and warranty specialists

 

[How much]

I see that the NFU are dropping turbine insurance cover, and will be subbing it out to other companies from now.
Any recommendations of insurance companies to look for quotes from direct, or is it best to stick under the NFU umbrella (I highly doubt it!)

We have cover with Bruce Stephenson , how good they are i dont know you only find that out if you claim!!!

 

[Princess Pooper]

Bruce Stephenson is a broker, several suggeste that name to me but when I asked last year they were not taking on new business for E3120s and similar capacity. We are with Northern Alliance, again, a broker, the insurer is Aviva. Have a claim in at present so will see how good they are .....

 

[jcb360]

We have cover with Bruce Stephenson , how good they are i dont know you only find that out if you claim!!!

If you have an e3120 it won't be if, but when you have to claim.

 

[WindCare]

If you have an e3120 it won't be if, but when you have to claim.

I think you are right.

Our structural engineer was genuinely shocked when we showed him the bedplate on the e series and not surprised that they are failing.

We are also really concerned about the e series brake and currently trying to develop an electrical braking fix to be able to put less strain on the mechanical braking system.

 

[jcb360]

http://www.manchestereveningnews.co...news/storm-barbara-blows-blades-wind-12369035

 

[kill]

http://www.manchestereveningnews.co...news/storm-barbara-blows-blades-wind-12369035

That's a main shaft broken I'd think. Endurance stopped around 40 turbine's in January of this year from the same batch for that shaft to be inspected after a couple of shafts sheared. Mine was one of the 40 stopped and wasn't allowed to run for over 6 weeks through peak wind harvest conditions, but after two fails of the shaft it miraculously passed its third test!!!! Very unsure how accurate the testing was or rather if Endurance could afford to rectify the shafts.

 

[DC21]

Not the way I wanted to start Christmas...January is going to be a busy month.

 

[Still Farming]

Lot of firms being "white knights " maybe scrabbling to "look after " owners in this void ?Who knows ????

 

[Sandy]

Not the way I wanted to start Christmas...January is going to be a busy month.

One of yours?

 

[sherg]

One of yours?

It said it was one of tgc's in the link does that mean its earthmill's now?

 

[DC21]

TGC developed the site, its owned by someone else, not Earthmill. Wouldn't be appropriate of me to say anymore.

 

[roscoe erf]

TGC developed the site, its owned by someone else, not Earthmill. Wouldn't be appropriate of me to say anymore.

was talking to the owner about this

 

[jcb360]

was talking to the owner about this

Did he have anything interesting to say?

 

[WindCare]

Has anyone else seen cracks in towers - at the toe of the weld just below the yaw ring? We are aware of at least 6 but there will likely be more. Not good.

 

[sherg]

Has anyone else seen cracks in towers - at the toe of the weld just below the yaw ring? We are aware of at least 6 but there will likely be more. Not good.

On e series or x?

 

[WindCare]

e series.

 

[jcb360]

Has anyone else seen cracks in towers - at the toe of the weld just below the yaw ring? We are aware of at least 6 but there will likely be more. Not good.

Well, it says on your website that your company is an "Endurance Authorised Service Provider" so surely you'll be offering a fix for these cracked towers?

 

[Sandy]

Well, it says on your website that your company is an "Endurance Authorised Service Provider" so surely you'll be offering a fix for these cracked towers?

A welder?

 

[kill]

Has anyone else seen cracks in towers - at the toe of the weld just below the yaw ring? We are aware of at least 6 but there will likely be more. Not good.

More problems due to Very low gradeChinese monkey metal.
( Note to myself "Hide the rope now")