error code fendt 516

[icanshootwell]

The code 1D112 has come up, something to do with ad-blue, filter has not long been changed so should not be that, anybody got any suggestions it might be?

 

[Fendt516profi]

I'll tell you tomorrow when I look in book

 

[Fendt516profi]

3rd from bottom

 

[icanshootwell]

Cheers for that, i filled the ad blue tank on tractor the other day, could it be too much pressure?
Also been moving implements around yard and tractor not getting properly warm, stop starting also, could this have a bearing. going by the book could be a few possibilities.

 

[Fendt516profi]

All relying on sensors so could be anything just failed to read in clear fault code and see if it does it again

 

[8100]

Is error code 0SH 1T in the Fendt manual ? think it means Tractor on its side due to speed walk of shame required ..

 

[Fendt516profi]

Not had that one come up yet. I'll have a look in manual

 

[icanshootwell]

All relying on sensors so could be anything just failed to read in clear fault code and see if it does it again

Found out what the problem is, its the return pump for the ad blue, its not clicking in when tractor is turned off. Don,t know why it,s not working yet.

 

[Chuckie]

Found out what the problem is, its the return pump for the ad blue, its not clicking in when tractor is turned off. Don,t know why it,s not working yet.

Did you get this fixed? having the same code on my 516 now And it cuts down to about 25hp so isn't fit to use

 

[icanshootwell]

Did you get this fixed? having the same code on my 516 now And it cuts down to about 25hp so isn't fit to use

Yes it was the as blue pump, tractor had only done 1200 hrs at the time, warranty was out so had a £1k bill , not happy with agco for that, pump should not be failing on those hrs.