Farm Engineering

milkloss

Member
Livestock Farmer
Location
East Sussex
Not a bodge as it has paint on it. I doesn’t half make it easier dragging it across the yard.
B619D0D7-F454-4BD4-BDBF-24DCFD0E6F24.jpeg
 

tinman

Member
Location
Ulster
You have a 3D metal printing machine, cool....

if it was me id save my powder and cut two discs out of 4mm, sit them on a off cut of pipe of he same OD and press the center of them down to concave them.
if you dont have a press then the same setup with a few blows of a well aimed sledge will give a similar effect.
 

steveR

Member
Mixed Farmer

SFI - What % were you taking out of production?

  • 0 %

    Votes: 77 43.5%
  • Up to 25%

    Votes: 62 35.0%
  • 25-50%

    Votes: 28 15.8%
  • 50-75%

    Votes: 3 1.7%
  • 75-100%

    Votes: 3 1.7%
  • 100% I’ve had enough of farming!

    Votes: 4 2.3%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,286
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top