FarmForce Corn Drill - changeover relay

[berty75]

Hi there,

I am having problems with the changeover relay on my FarmForce corn drill. Ideally I need a new relay or a reconditioned box. Unfortunately, FarmForce no longer exists, does anyone know if any other makes are compatible with this FarmForce Drill? Maybe Amazon?

Or does anyone know where I might be able to get hold of a FarmForce part?

Many thanks in advance,

Bert

 

[Grassman]

Hi there,

I am having problems with the changeover relay on my FarmForce corn drill. Ideally I need a new relay or a reconditioned box. Unfortunately, FarmForce no longer exists, does anyone know if any other makes are compatible with this FarmForce Drill? Maybe Amazon?

Or does anyone know where I might be able to get hold of a FarmForce part?

Many thanks in advance,

Bert

David King electronics will sort your problem one way or another

 

[newhollandcruzr]

I have had problems with them , i had a new one from Vogel & noot ££££ as theres are the same but not sure if anyone took on the drills after there closure i think Amazone just had the ploughs . I have taken them apart cleaned them up and a spot of jb weld got it going again! You could try Dunns ploughs or Andrew Guest will sort it.

 

[Alistair Nelson]

Hi there,

I am having problems with the changeover relay on my FarmForce corn drill. Ideally I need a new relay or a reconditioned box. Unfortunately, FarmForce no longer exists, does anyone know if any other makes are compatible with this FarmForce Drill? Maybe Amazon?

Or does anyone know where I might be able to get hold of a FarmForce part?

Many thanks in advance,

Bert

When you say changeover relay do you mean the hydraulic electromagnetic valve that was fitted to some drills to get the markers to the changeover with a switch in the cab for which marker goes down, sorry poor explanation?

 

[berty75]

When you say changeover relay do you mean the hydraulic electromagnetic valve that was fitted to some drills to get the markers to the changeover with a switch in the cab for which marker goes down, sorry poor explanation?

Hi,
Its the relays responsible for closing off the tramlines and they are staying closed on one side.

 

[Alistair Nelson]

So the relay on the circuit board inside one of the white junction boxes on the Drill frame?