Farmforce ultratilth discs/hubs

[Flat 10]

Anyone know of a source/recognise a machine that is fitted with the same type?

 

[Will 1594]

Measure it. Look like forge de niaux
French. Same as on knight , Ring James pan anglia
@Alistair Nelson May know

 

[robbie]

James has gone to pastures new now Dereham has shut!

 

[nick...]

James has gone to pastures new now Dereham has shut!

Was he the one who got sacked or am I thinking of someone differant
Nick...

 

[Dales Agri Sales Agency]

Beeversales

Welcome to the Beeversales website. Founded in 1986, Beeversales Components Limited has grown into a major supplier of agricultural machinery...

beeversales.com

Looks very similar to the type we used to use on Erth Panbuster?

 

[Alistair Nelson]

Good evening they were sourced from a firm called industriehof in Germany and are the same as used by knight otherwise talk to mark Donsworth at MDT he can source them.

 

[Will 1594]

James has gone to pastures new now Dereham has shut!

Are you sure spoke to him thursday and had parts next day

 

[Will 1594]

Good evening they were sourced from a firm called industriehof in Germany and are the same as used by knight otherwise talk to mark Donsworth at MDT he can source them.

Alister have emailed forge de niaux ,who make them direct ,after some wavy discs and other spares ,

 

[ab100]

James is definitely still at Pan Anglia, doing the same job, just no depot at Dereham, everything is now sent out from Sudbury.

 

[robbie]

Oh apologies I got that wrong, I'm sure dad said he was working for largos and delivered us some filters a couple of weeks ago.
I should really listen more to the old chap.

 

[ab100]

Oh apologies I got that wrong, I'm sure dad said he was working for largos and delivered us some filters a couple of weeks ago.
I should really listen more to the old chap.

You're not far out, Keith is at Largo, and he was the store manager at Dereham

 

[robbie]

See I should have listened more tentatively to the old chap.

 

[Flat 10]

I think PA are going to come up trumps as they can get bits from industryhof. They also think that they are fitted to cousins patriots if that’s helpful to anyone.

 

[Flat 10]

Got these hubs from PAnglia and they are the same as patriot ones. @Alistair Nelson do you or anyone else know what the correct bolts are to use as shear bolts? Currently has Allan key headed ones with 30mm nuts on, not sure these are right as some are bent which isn’t ideal..... thanks

 

[Alistair Nelson]

They are shear bars with grooves in where each bar had 5 breaks on it per bar not bolts. The grooves alternated along the bar 25mm 20mm. The bars I can’t remember but an pretty sure were 1’ dia whereas sumo were 24mm I think but just check with linkage pins which are imperial.