Steering should maybe be a bit higher
How fast are you going ?
Faster wants lower figures
Slower wants higher
When you turn on gps the fast steer comes on it's the button above it'll be on constant red light it needs to be flashing to be off the only way to turn it off is through making a headland management sequence on the white button.
The rear axle wants locked off during autosteer which will also help as if it's on plus fast steer it'll want to wander all over the place especially turning in onto the line.
@Andrew any help getting the rear steering off ?
Thanks that's pretty much exactly how I run mine but with quick steer offFrom the home screen:
Press the ‘Second page’ icon (bottom left)
Press the ‘Switches’ (Second down on right)
Press ‘4WS 2’ (4th down on left)
You’ll see a satellite, you want a tick next to it. If no tick, press the satellite, then change with plus and minus then press save.
Always run the 4ws in ‘user’ mode not 4ws.
I always find delay the best. To do this:
Press ‘Second page’
Press ‘4ws user’ (4th down on left)
Press ‘Delay’ (2nd down on left). You can alter the percentage as well. I run at 30%.
Basically it’s 2ws then until the fronts turn to 30%, then 4ws kicks in.
That I cannot tell you. I think its just a standard Jcb wheel. I have the GPS buttons on the pillar but they are greyed out. Greenstar dome on roof and JD guidence screen. The toggle switch for engaging autosteer etc is definitely aftermarket addtionYou've got me intrigued now !!
Is it an electric steering wheel or wired into the tractor?