Feed bins etc

Pair of bottom empty Skiold bins, will hold about 5 tonne each,they have lids on but are not waterproof so need to go in a shed. Can be dismantled for transport. £300 + vat each or £500 + vat for both



Other mill/mix equpment also for sale, Skiold 3 phase hammer mill for grain, Cormall pto hammer mill for small bale straw and grain, Cormall KB6 3 phase chain/slat mixer, all can be seen working at present

Nr Preston, Lancs

 

[Chuckie]

Now £200 + vat each, too good to scrap

 

[lowflyer]

Hiya. Are the bins still for sale? if so are the sides steel or ply? Also have you got approx height and width please.

 

[Hayboy]

Do you have anymore info on the pto hammer mill?

 

[Chuckie]

Hiya. Are the bins still for sale? if so are the sides steel or ply? Also have you got approx height and width please.

Hello, the sides are like a composite board. They are now dismantled. Overall height about 16ft, 5ft square wide.

 

[Chuckie]

Do you have anymore info on the pto hammer mill?

It's a Cormall "HMG 500 strawmill". Designed mainly to grind straw in small bales, but also has a grain attachment on top. Comes with spare screens of different sizes, has a fan on the back to blow the milled product down a 6 inch pipe. Made in the 80's, here since new and was in daily use until recently.

 

[Chuckie]

Do you have anymore info on the pto hammer mill?

Original brochure with info

 

[lowflyer]

Hello, the sides are like a composite board. They are now dismantled. Overall height about 16ft, 5ft square wide.

fibre glass type composite? are they easy to rebuild/dismantle again?

 

[Chuckie]

fibre glass type composite? are they easy to rebuild/dismantle again?

No it's like a wooden composite, they will need to be under cover.

Yes they just slot together, could build one up in an hour easily.

 

[lowflyer]

No it's like a wooden composite, they will need to be under cover.

Yes they just slot together, could build one up in an hour easily.

could you send me your number please

 

[Horn&corn]

What condition is the hammer mill and what price do you want for it?

 

[Chuckie]

What condition is the hammer mill and what price do you want for it?

Which one, the pto one in the pic above or the electric one for grain only?

They are both in good working order and come with spare screens etc

 

[Horn&corn]

Elec hammer mill. Presumably 3 phase. Sucker blower type or gravity fed and gravity drop. What size motor and mill. We would like to mill maize, wheat, barley, oats. Price. Thanks

 

[Chuckie]

Elec hammer mill. Presumably 3 phase. Sucker blower type or gravity fed and gravity drop. What size motor and mill. We would like to mill maize, wheat, barley, oats. Price. Thanks

Yes it's 3 phase, 15hp motor. Skiold CM3 is what it says on the plate, I think the current one is a DM3 which is alomst identical. Suck/blow type, it's been set up here with a reception hopper to suck from with an auger feeding from a large bin, controlled by a magic eye sensor to keep the hopper topped up.

In full working order, had a new fan and rotor not long ago, comes with feed hopper, spare hammers and screens, some pipework and wiring/sensor/switchgear etc, £500 + VAT

 

[Bob c]

Hi Chuckie,
Did the bins and the PTO hammer mill sell ?

 

[Chuckie]

Hi Chuckie,
Did the bins and the PTO hammer mill sell ?

Hello Bob,

Still got the bins but both Mills have gone now

 

[Bob c]

Hello, Sorry for late reply

What size front do the 4 legs stand on ?
just thinking of space needed
Have you still got the bottom feed emptying auger
Thanks

 

[Chuckie]

Hello, Sorry for late reply

What size front do the 4 legs stand on ?
just thinking of space needed
Have you still got the bottom feed emptying auger
Thanks

Each bin is 5ft square at the leg bases, yes still got the horizontal auger