Fendt 312 lost cruise/pedal mode

[organicguy]

As title, in pedal mode appears to try to move off but comes up with foot brake applied warning code.
Any clues to a simple fix?

TIA

OG

 

[Michael S]

I'm guessing that you could check the brake light switch which will probably be up near the hinge point of the brake pedals under the dash?

 

[Coreycow]

Could it be your clutch pedal?
If the spring has become weak and doesn’t bring it back fully to activate the switch you’ll see the error below. Try putting your foot under the clutch pedal and pulling it back to see if it goes away.

 

[Mur Huwcun]

Can it be seat switch? Kind of remember someone mentioning similar or that TMS woukd not work and it had to be driven manually and it turned out to be wiring in the seat to the operator present switch

 

[organicguy]

Could it be your clutch pedal?
If the spring has become weak and doesn’t bring it back fully to activate the switch you’ll see the error below. Try putting your foot under the clutch pedal and pulling it back to see if it goes away.
View attachment 1034499

Not that symbol coming up, foot brake symbol appearing. Checked brake switches, seemed ok, moved magnets, made no difference. Replaced in same position.

Can it be seat switch? Kind of remember someone mentioning similar or that TMS woukd not work and it had to be driven manually and it turned out to be wiring in the seat to the operator present switch

Dealers were here on Friday, did not have a clue!
Did query seat wireing but inconclusive!
Brake lights don't work so suspect brake switch faulty?