Fendt 718 remap

[bill and bens dad]

Well turns out this is 100% correct, got the tractor mapped today, it was only around 160hp at the shaft, got it turned up to around 200 and then when we tried to go higher the torque sensor kicked in and killed her away back down to 150hp and brought up codes on the dash.. so had to go backwards and settle for our 200hp map. She still gained 45hp and 264lbft over standard though so should hopefully make her a good bit better to work with!

View attachment 845917

View attachment 845915

View attachment 845916

View attachment 845914

i would be concerned by the torque back up figures obviously the remap version is far worse,but jd often have TBU figures in the 30 %,??anyone??

 

[Digester Man]

What does torque backup actually mean?

 

[bill and bens dad]

better people than me will explain it, but too me it means the hang on of an engine,when it is under great pressure,ie going up a steep long hill when the engine is dying away one with i higher TBU will hang on longer,this can also show on a dyno by the length of the test,over to the experts lol

 

[Blue.]

the front axle is different , front linkage & gearbox are all different on , a fendt is one tractor i would not remap , better to buy the one you need

What’s the difference in the front axle?

The diff the hubs and the housings on a 720 and 724 are the same.

 

[Speedstar]

What’s the difference in the front axle?

The diff the hubs and the housings on a 720 and 724 are the same.

View attachment 846092View attachment 846093View attachment 846094View attachment 846095View attachment 846096View attachment 846097

The load rating is more on a 724 and the pinnion is heavier, on all S4 tractors

 

[Blue.]

The load rating is more on a 724 and the pinnion is heavier, on all S4 tractors

The load rating may be more but the pinions are the same see the pictures.

If anyone is interested I’ve screenshots of both the 720 and 724 rear end parts books and I cannot find anything different,the final drives are the same the transmissions are the same.

 

[kiwi pom]

We steinbaured my old 720 it was 247 at the shaft did nearly 6000hrs on it never missed a beat

What happened when it got to 6000 hours?

 

[Claasman]

My 7719 will be the same as a 720

 

[Claasman]

Mf 7719 will be same as 720

 

[Thomas5060]

What happened when it got to 6000 hours?

Probably sold it

 

[kiwi pom]

Probably sold it

Wonder how long it lasted after that?
Hope the new owner new its history.

 

[Speedstar]

Mf 7719 will be same as 720

Not so sure of that I was told it was the ML 140 gearbox that was in them

 

[Blue.]

Wonder how long it lasted after that?
Hope the new owner new its history.

The only way you’d ever know the true history of a machine is if you owned it from new.

 

[Speedstar]

The load rating may be more but the pinions are the same see the pictures.

If anyone is interested I’ve screenshots of both the 720 and 724 rear end parts books and I cannot find anything different,the final drives are the same the transmissions are the same.

That is not what I told but you may be right I just know I would not remap one and are very happy with the ones we have

 

[Blue.]

Not so sure of that I was told it was the ML 140 gearbox that was in them

7719 have the ml180 box

 

[Speedstar]

The load rating may be more but the pinions are the same see the pictures.

If anyone is interested I’ve screenshots of both the 720 and 724 rear end parts books and I cannot find anything different,the final drives are the same the transmissions are the same.

Has your one got 2 brake pedals ?

 

[dazza b]

People do seem to forget that the main killer of the fendt transmission is the operator.

 

[Speedstar]

7719 have the ml180 boxView attachment 846116

When you have a good luck at them they look a lot different to a 724

 

[dazza b]

Wonder how long it lasted after that?
Hope the new owner new its history.

It's still going now, why wouldn't it last?? Same could be said about these 4 pot tractors that are 160/170hp

 

[Mouser]

7719 have the ml180 boxView attachment 846116

Good to see some evidence rather than just hearsay