Fendt camera

[Northern farmer]

Relatively easy to make cables but if one prefers a ready made product, Top-Vision
http://www.top-vision.eu/index.php/en/producten/kabels-en-accessoires-2/326-fendt-infoview-adaptor
or Agracom
http://www.agracom.de/Fendt-Kamera-...rkabel.html?XTCsid=1b70hiovdsg82gm8c1jl53fdo4
both have cables and complete kits.

 

[samstruck]

Hello.
Is it possible to adapt from 5pin down to an RCA female plug. I have cameras already installed in implement already and its output in RCA. Just trying to get rid of another screen out of tractor. If the c1000 pinout is the same as the fendt pinout then should be easy cable to make.

 

[Pheasant Surprise]

Hello.
Is it possible to adapt from 5pin down to an RCA female plug. I have cameras already installed in implement already and its output in RCA. Just trying to get rid of another screen out of tractor. If the c1000 pinout is the same as the fendt pinout then should be easy cable to make.

How do your cameras get power to them, another connector perhaps? You will need to get power to them. The Fendt connector has pins for 12v power supply (pins 3 and 4) as well as the PAL composite video pins (pins 1 and 5). See the connector pin out in this older post here:

https://thefarmingforum.co.uk/index.php?threads/fendt-camera.6742/#post-1057346

 

[samstruck]

How do your cameras get power to them, another connector perhaps? You will need to get power to them. The Fendt connector has pins for 12v power supply (pins 3 and 4) as well as the PAL composite video pins (pins 1 and 5). See the connector pin out in this older post here:

https://thefarmingforum.co.uk/index.php?threads/fendt-camera.6742/#post-1057346

View attachment 323846

The little wireless module already has its own power. So I will just need to be putting video input in via RCA plug. I hope it works.

 

[Pheasant Surprise]

The little wireless module already has its own power. So I will just need to be putting video input in via RCA plug. I hope it works.

2 wires then. Dead easy

 

[samstruck]

2 wires then. Dead easy

So I use pins 1 and 5? Does anyone know if C1000 screen has same pin out as the fendt?

 

[Pheasant Surprise]

So I use pins 1 and 5? Does anyone know if C1000 screen has same pin out as the fendt?

I dunno. Don't have a C1000.

Have you got a multimeter so you can ID the +12v supply pin? Check the voltage on pins 1 and 5 on the back of the console. As long as you DONT have +12v there you should be good to go, as your camera video output might not take kindly to having 12v across the terminals (a video signal is generally about 1V peak-peak). Might need to swap the wires around to get the polarity correct for the video signal.