Fendt Vario terminal

[Richard Smyth]

I am trying to get a vra map uploaded from a trial version of Trimble ah software onto my Vario terminal.

Has anyone done this and how did you do it. I seem to be missing something.

 

[Farmerboyben]

Get your Fendt updated to 7.84 and you’ll be able to do vra via usb..

 

[Richard Smyth]

Get your Fendt updated to 7.84 and you’ll be able to do vra via usb..

I will be in the new year. Working with a guy in Agco Australia on it all now. They are keen to get people using the documentation and vra on the terminal and is trying to get the dealers up to speed on it all.

 

[Pheasant Surprise]

Get your Fendt updated to 7.84 and you’ll be able to do vra via usb..

7.84 just been released so I’ve been reliably told...

 

[Richard Smyth]

Looking like I need to get the topcon reciever updated to a Trimble sooner rather than later. Not much for us on topcon other than USB transfer which is still an improvement.

 

[Andy12345]

7.84 just been released so I’ve been reliably told...

View attachment 754868

The above picture is the Fendt Varioguide Contour Assistant option ..... would anyone happen to know if it comes with software version 7.84 as my software has been upgraded and it's missing, or is it an option which is charged for? If charged for approx cost please?

 

[Pheasant Surprise]

The above picture is the Fendt Varioguide Contour Assistant option ..... would anyone happen to know if it comes with software version 7.84 as my software has been upgraded and it's missing, or is it an option which is charged for? If charged for approx cost please?

Contour Assistant is only available with either the Trimble or NovAtel receivers with separate VD03 steering controller. It’s an extra cost option, much like Section Control. Sorry not sure of cost yet, I’m waiting to be upgraded.

What receiver do you have?

 

[Andy12345]

Contour Assistant is only available with either the Trimble or NovAtel receivers with separate VD03 steering controller. It’s an extra cost option, much like Section Control. Sorry not sure of cost yet, I’m waiting to be upgraded.

What receiver do you have?

Topcon so it seems I'm unsupported .... AGCO I'm told are doing a special offer on it at the moment .