Fendt Varioguide and field marking

shakalakka

Member
Arable Farmer
Hi,

On the varioguide terminal, is it possible to mark worked area based on say the «go» button? So that i only mark the map when i click «go» and enable varioguide, drop the implement and so on. Also stop marking on «end».
 

Boysground

Member
Mixed Farmer
Location
Wiltshire
Don’t think you can’t turn it on and off just by pressing the button. The tractor needs to be doing something. So implement going down or auto steer activating. Perhaps your best bet is to set it to mark with spool activation and set one of them on a timer for 1 second.

Bg
 

Deerefarmer

Member
Location
USA
Yes. You can set up your go and end functions to engage autosteer.

In trigger settings touch the soft key with the steering wheel on it. Will only paint on your screen with auto steer engaged.

Is that what you mean?
 

shakalakka

Member
Arable Farmer
i just want to mark on something else then just driving. As default, the field will be marked by the implement width just by driving over it. I would like the marking to only happen at some specific trigger - like dropping the drill, or enable autosteer. This will help a lot when drilling, easier to see what have been worked🤓 but thanks guys, ill check the trigger section!
 

Boysground

Member
Mixed Farmer
Location
Wiltshire
This is the page you want



FD438FAD-332F-4055-A4E2-786C95077B80.jpeg

With the uni press here I have it set so that coverage starts when auto steer is activated

Bg
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 79 42.9%
  • Up to 25%

    Votes: 63 34.2%
  • 25-50%

    Votes: 30 16.3%
  • 50-75%

    Votes: 3 1.6%
  • 75-100%

    Votes: 3 1.6%
  • 100% I’ve had enough of farming!

    Votes: 6 3.3%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,287
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top