Field IQ switching

[Gadget]

We have an FM750 screen with base station RTK, this is connected to a Field IQ.
Often, once the headland run has been done and an AB line set, the auto switching on turns on too late. I've been through the settings and they seem to be correct, the funny thing is that, if I put in a new AB line, it then switches on correctly!

 

[Badshot]

Yep.
Done my head in.
Never did get to the bottom of it.
Annoyingly it means you can't use the headland last function either, spent literally days and days trying to get to the bottom of it.
Never did.

 

[Gadget]

Glad its not just me!

 

[FrallyWally]

is the apply latency to boundry option on or off? it must be set as on or you get skips on the bouandry

 

[Gadget]

I'll have to go into the menu to look for it, thanks.
I have both on and off overlaps set to 99%

 

[Gadget]

@FrallyWally
I have looked in the menu on the 750 and there is a "Boundary Switching Overlap" tab, it is set to 99%.
The "Coverage Switching Overlap" tab is also on 99%

 

[B'o'B]

I think it’s in the “Material Setup”, not the “Section Control” settings.

 

[Gadget]

I think it’s in the “Material Setup”, not the “Section Control” settings.

OK thanks, I'll look there

 

[Paul Knights]

How about calling Vantage on 01480 861824 and their support line dedicated to Trimble products could help.
Good luck.

 

[Gadget]

I've done that, we went through the various screens and the settings were as they would have expected.