- Location
- Ballyclare Northern Ireland
Latest auction purchase.
What bit is missing and where would I get it?
What bit is missing and where would I get it?
Fiona Grassbag si.
- Thread starter shumungus
- Start date
agri knives
Member
- Location
- middle of ireland
Parts can’t be got for them now , but they are a great seeder.
- Location
- Wormingford, Essex
This was on Google if it helps?
spin cycle
Member
- Location
- north norfolk
looks like a fairly flimsy but non vital bit anyway 
......designed to be taken off when not in use?......if it works just crack on and use mole grips to adjust
......designed to be taken off when not in use?......if it works just crack on and use mole grips to adjustagri knives
Member
- Location
- middle of ireland
Your 100% , that bit is gone off mine years , works away without it.looks like a fairly flimsy but non vital bit anyway
- Location
- Ballyclare Northern Ireland
What was it for? Have ordered manual but won't be here for a couple of days. Is it to do with setting?
Boohoo
Member
- Location
- Newtownabbey
The missing bit adjusts the shutters in the base of the hopper and hence the seed rate. As said parts are no longer available. It should be possible to cobble something together.
Ridges was the main agent for Ballycarry and the surrounding area.
Ridges was the main agent for Ballycarry and the surrounding area.
- Location
- Ballyclare Northern Ireland
Ta, I'll give Sooty a ring.
agri knives
Member
- Location
- middle of ireland
Yes it’s for setting the seed rate , but I have mine set at the standard rate for grass seed and have it locked with a jubliclip.
- Location
- Wormingford, Essex
A good person with a 3d printer is what's needed.
Boohoo
Member
- Location
- Newtownabbey
The setting depends on the mixture though. Something like a high clover mixture needs a lower setting.
- Location
- Ballyclare Northern Ireland
Is there a helpful member out there with access to a complete one for a few good photo's and some measurements?
agri knives
Member
- Location
- middle of ireland
Yes I adjust it with a tip of the hammer and move the jubliclip, can’t beat experience.
Boohoo
Member
- Location
- Newtownabbey
I'll get photos and measurements. Don't be afraid to remind me.
- Location
- Ballyclare Northern Ireland
Didn't realise you had one.
Boohoo
Member
- Location
- Newtownabbey
I haven't, but I work for a man who does.
- Location
- Ballyclare Northern Ireland
I have a man lined up who can scan/draw and replicate using 3D printing. All I need is a access to a complete one. Would make it worth some ones while and supply them a spare one too. Any takers?
Do you still have it and if so is it sow sale thanks David