Float on mower

Huwie

Member
Anybody know how to put spool in float on Kuhn moco. Manual says hold spool down for 3-4 seconds but have been told this is wrong as can loose pressure as your on the move.
 

ColinV6

Member
Sorry mf 5613

Assuming manual spools it should just be a case of pushing one of the levers toward the window as much as possible, provided they have a float function.

Should be the same for lowering trailers etc. Can you stick a pic up of your spool levers?
 

Huwie

Member
Iv sorted the float well I think… swapped 2 pipes on mower to different spool. The only issue I have is when I set the pressure gauge to 80 ish bar on clock the pressure in increases itself after lifting up and down when mowing for about 15 mins. Won’t cut properly then cuz there’s not enough ground pressure so have to keep decreasing it which is a pain in arse
 
Location
Cheshire
Iv sorted the float well I think… swapped 2 pipes on mower to different spool. The only issue I have is when I set the pressure gauge to 80 ish bar on clock the pressure in increases itself after lifting up and down when mowing for about 15 mins. Won’t cut properly then cuz there’s not enough ground pressure so have to keep decreasing it which is a pain in arse
The tap that you open to set the pressure mustn’t be closing effectively.
Reading the manual this morning, float or opposite way for 5 seconds.
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 79 42.9%
  • Up to 25%

    Votes: 63 34.2%
  • 25-50%

    Votes: 30 16.3%
  • 50-75%

    Votes: 3 1.6%
  • 75-100%

    Votes: 3 1.6%
  • 100% I’ve had enough of farming!

    Votes: 6 3.3%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,287
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top