FM750 with EZ Pilot-seed drill problem adjustment

[SinisaB]

Hello everyone,

I have a problem with setting up seed drill on the field. In corn planting (70 cm) I have gaps between 2 swaths from 68 till 76 cm. Lines are pretty straight. Where I do a mistake?

 

[Shutesy]

Hello everyone,

I have a problem with setting up seed drill on the field. In corn planting (70 cm) I have gaps between 2 swaths from 68 till 76 cm. Lines are pretty straight. Where I do a mistake?

What type of signal are you paying for?

 

[SinisaB]

RTK VRS.

 

[GPS_Support_2014]

Could be one of the following:
- roll offset calibration issue
- antenna left/right offset incorrect (physically or the display setting)
- implement left/right offset incorrect (physically or the display setting)
- implement drifting left or right but I don’t think you’d see this with a corn planter

 

[SinisaB]

Could be one of the following:
- roll offset calibration issue
- antenna left/right offset incorrect (physically or the display setting)
- implement left/right offset incorrect (physically or the display setting)
- implement drifting left or right but I don’t think you’d see this with a corn planter

Thank you for the repply!
I do suspect that roll offset is not correct.
As I remmember, antenna offset is calculated in roll calibration. Implement offset is not excluded.
You are right for implement drifting. Fields are smooth. 8 row planter.
Also, there is a gap in 3 point hitch. That also could be a problem.