Ford 30 Series pick up hitch parts

[OJSligo]

Hi sll,

Looking for your help.
While adjusting the apuh of my 5030 yesterday I wrung the tie rod from the threaded bolt. Have done a repair job but would like to get a replacement. Anyone out there know where I might be able to source 1 of these. New Holland have the part listed as a dead part. Its catalogue number is 83982158

Thanks for looking

 

[daveydiesel1]

Hi sll,

Looking for your help.
While adjusting the apuh of my 5030 yesterday I wrung the tie rod from the threaded bolt. Have done a repair job but would like to get a replacement. Anyone out there know where I might be able to source 1 of these. New Holland have the part listed as a dead part. Its catalogue number is 83982158

Thanks for looking

If u took it to local handyman engineer he should be fit to make a new 1 or put new threaded bar into it

 

[Mur Huwcun]

Just cut the thread off and weld on an M16 bolt 8.8 or 10.9. Don’t use threaded bar unless you know it’s tensile strength as most threaded rods are only 4.8 and will stretch