Ford 4000 Hydraulic Cross Shaft

Smudge

Member
Location
Pembrokeshire
Does anyone know who supplies a Ford 4000 hydraulic cross shaft new? Can't find anything on Sparex, Agriline or Kramp. Only the shaft up to the 3910 and the shaft for the 5000 upwards. Or does one of these fit? Thanks.
 

AJR75

Member
Livestock Farmer
Location
Somerset
I had one go on my super major a few years back and sourced one from agriline. It was ok but like you was stuck in terms of other options for replacement. You could try them but it’s likely to need some fettling to get it to fit. Have you tried looking at breakers? Swapping the whole top cover might be an easier option than stripping out the old shaft. From memory they’re pretty straightforward to set up as Well
 

Smudge

Member
Location
Pembrokeshire
Thanks for your replies, when I stripped it this morning it turned out the splines in the arms had stripped not the shaft, again the usual suspects didn't supply them but found them on the QTP site so will get a price tomorrow. Cheers (y)
 

multi power

Member
Location
pembrokeshire
Thanks for your replies, when I stripped it this morning it turned out the splines in the arms had stripped not the shaft, again the usual suspects didn't supply them but found them on the QTP site so will get a price tomorrow. Cheers (y)
Would used genuine ford parts not be better than spurious new parts ?
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 78 42.9%
  • Up to 25%

    Votes: 63 34.6%
  • 25-50%

    Votes: 30 16.5%
  • 50-75%

    Votes: 3 1.6%
  • 75-100%

    Votes: 3 1.6%
  • 100% I’ve had enough of farming!

    Votes: 5 2.7%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,286
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top