Ford 4600 rebuild for 40k

[nosenfarmer]

Hello, i have seen a 7810 with a 4000 back end, and it goes 70kmh. But i want my 4600 to go about 40/50k. How do i learn what diff i need to achive this?

 

[Spud]

Hello, i have seen a 7810 with a 4000 back end, and it goes 70kmh. But i want my 4600 to go about 40/50k. How do i learn what diff i need to achive this?

Why? How will you keep the thing in a straight line and stop it?

 

[Robt]

Why? How will you keep the thing in a straight line and stop it?

His mullet and sun glasses will help aero dynamics and keep it straight mr spud

 

[Devil's advocate]

I read this as a quote for rebuilding classic Ford tractor £40,000.

 

[yellowbelly]

Hello, i have seen a 7810 with a 4000 back end, and it goes 70kmh. But i want my 4600 to go about 40/50k. How do i learn what diff i need to achive this?

No need to change the diff - just weld up the planetary reduction gears in the bell housings ......



....... and hold on tight

 

[nosenfarmer]

I read this as a quote for rebuilding classic Ford tractor £40,000.

It is about increasing top speed, i could swap the 4th gear aswell i think. But again i do not know what gears i need to put back in

 

[Boohoo]

16.9r38s will get them up to that speed without messing around with the gearbox or diff.

 

[David.]

Hope all the steering axle pins, joints and bushes are in good fettle.

 

[nick...]

And the brakes
nick...

 

[Wellytrack]

And the brakes
nick...

Are for wimps.

 

[nosenfarmer]

16.9r38s will get them up to that speed without messing around with the gearbox or diff.

Already bought 540/65R34 and i got 35 at 2500 rpm

 

[Boohoo]

And the brakes
nick...

Brakes only slow you down!