Ford 4600

[JP1]

Too heavy for an Ifor Williams

As if that might stop anyone trying .................

 

[smcapstick]

As if that might stop anyone trying .................

I know

That was 100% what the post was for, though

 

[Happy hillbily]

I like mine

Been here since 93 or 94, used to feed with a loader and shear grab, scrape, and bed with a teagle tomahawk and done every other job on the farm. Its had the front axle rebuilt many times, had one clutch, and at one time in a previous life had a block, i rebuilt the head a couple of years ago, and i snapped the 3 point linkage cross shaft with a steelfab ditcher on the back, I replaced the ball ends as the balls had worn through the arms. oh and one set of tyres, as the sidewalls perished for being in the muck all them winters. Starts no mater how cold it is. Not bad to think its done over 15000 hrs

 

[multi power]

Too heavy for an Ifor Williams

But no problems for a Nugent

 

[Mursal]

What's the frame on the front (under the grill) of the poor little Ford for?
@Happy hillbilly

 

[Happy hillbily]

What's the frame on the front (under the grill) of the poor little Ford for?
@Happy hillbilly

Its for a 7ft atkinson snow plough blade that i got for a tenner years ago, it was handy for clearing snow off the council road to get the milk tanker in, also used it in summer when it turned wet and the cows would bring soil and muck onto the council road, saved wearing out the yard scraper rubber on tarmac !

 

[smcapstick]

But no problems for a Nugent

Ah... the fabled 4.5T gross weight Nugent