Ford 6810 ACV

[Agri Spec Solicitor]

I hope someone can help with this further problem we are left with after the cab has been off and back on.
The Auxiliary Control Valve, cirvleddoes not have an exciting life but it isolates the 3 point when just using the SCV.
It used to be fairly stiff to operate. Now it it as though it is not connected to its valve, and it does not do its job at all.
Is this a simple case of finding something to attach it to or is it a big job, wheel off etc or is it another cab off procedure beyond our limited skills?
Thanks.

 

[ford 7810]

Sounds like it hasn’t been connected up again after having a cab off , you will need to look underneath, maybe easier with the wheel off

 

[Agri Spec Solicitor]

Had a look. It’s all there with a tiny R clip on the end. It’s a wheel off job for sure so not for me!
There’s other issues too that missed quality control so off to mechanics.
thanks for the guidance.

 

[stitch]

Have a look underneath the cab at the back on the right hand side just over the lift arm casting. There should be a flat bar pointing out to the wheel with a hole in it which is item 36 in the diagram below.

New Holland Agriculture | Schematic, Manuals, Specifications and Diagrams for hydraulic lift cover & related parts - 7810, 7910, 8210 | MyCNH EU Store

Find schematics, manuals, specifications and diagrams for HYDRAULIC LIFT COVER & RELATED PARTS - 7810, 7910, 8210. Find genuine OEM parts for your needs.

www.mycnhstore.com

The rod with the r clip fits in that hole.

Hope that helps a bit.

 

[Agri Spec Solicitor]

Have a look underneath the cab at the back on the right hand side just over the lift arm casting. There should be a flat bar pointing out to the wheel with a hole in it which is item 36 in the diagram below.

New Holland Agriculture | Schematic, Manuals, Specifications and Diagrams for hydraulic lift cover & related parts - 7810, 7910, 8210 | MyCNH EU Store

Find schematics, manuals, specifications and diagrams for HYDRAULIC LIFT COVER & RELATED PARTS - 7810, 7910, 8210. Find genuine OEM parts for your needs.

www.mycnhstore.com

The rod with the r clip fits in that hole.

Hope that helps a bit.

Thanks that’s great. Decided to have a go myself tonight as mechanics have big delays at present and that tractor hasn’t put in a shift all year it looks too fiddly though without better access.