Ford 8340 hare button not working

[Cowcorn]

The change up button is not working , the tortoise or change down button is . Anyone got any ideas on whats wrong ?
Thanks in advance .

 

[bobk]

The change up button is not working , the tortoise or change down button is . Anyone got any ideas on whats wrong ?
Thanks in advance .

Disconnect the joiner and give it a blowout

 

[Jato]

Today’s top tip ......:
You can change up and down gears by clutching and revving to speed match then release clutch.

Certainly works in 5-8 range, can’t remember if it does in 1-4

 

[agrimax]

Ah...but if it's a prequad or iffy clutch switch it won't speed match.
Could be a faulty hare switch,or broken wire most likely somewhere down along the gear lever (would think it would throw an error code though) or as bobk says,a bad connection in the connector or the solder has let go at the switch.

 

[Cowcorn]

Its a pre quad model so no speed matching ,no error code displaying either . I opened the top of the gear lever and had a quick look the switch seems to be one piece is there a connector there ? Will look at the wires down the gear lever next wet day probably tomorrow!! Thanks for all advice and keep it coming .