Ford 8340 Transmisson pressure light .

[Cowcorn]

The hydraulic pressure light, the one above the hare symbol is after coming on along with a beeping alert .
Have changed all the filters but no avail
The book says the symbol represents steering port , trans pressure . .
A pressure test of the packs indicates the pressure is within its range .
Any ideas on how to get the light out and the beeping to stop ?? As its the spraying tractor the beeping is frying my head . Other than that its driving perfect . @bobk ,@Two Tone @Nearly .

 

[ridger]

Mine done it at low revs so I adjusted the idle up to 900 revs, and it's OK now

 

[bobk]

The hydraulic pressure light, the one above the hare symbol is after coming on along with a beeping alert .
Have changed all the filters but no avail
The book says the symbol represents steering port , trans pressure . .
A pressure test of the packs indicates the pressure is within its range .
Any ideas on how to get the light out and the beeping to stop ?? As its the spraying tractor the beeping is frying my head . Other than that its driving perfect . @bobk ,@Two Tone @Nearly .

Mine did that years ago , unplugged it . been fine since .

 

[livestock 1]

Does it come on when the oil is hot? If it does it’s possible to be a worn pump.

 

[Two Tone]

When mine did it, it turned out to be the pressure switch that was faulty, esp when hot.

 

[Gruffalo]

Could be the Pto oil feed pipe o ring

 

[Cowcorn]

Many Thanks for replies , will hit for Armstrongs after and get a new pressure switch and pto o ring and see how it goes from there .
Shouldnt be to expensive to sort one of the upsides of these days older girls !! I dont think its the pump as she spent a few days on the combi and was fine .
Also drilled maize last week with her without any lift problems and the trailed sprayer shouldnt strain her . There is a slight oil leak alright around the housing so @Gruffalo could be right about the o ring
Will report on how we get on .

 

[Paddy95]

did you solve the issue? having the same problem with my own 8340

 

[Cowcorn]

did you solve the issue? having the same problem with my own 8340

Yes changed the switch and it cured the problem .
Same problem currently on Ts 100 A so will do the same .