Ford NH 8340 SLE hydraulic oil leak

[Steph-a-knee]

Hello, can anyone help with this please.
When I was rolling yesterday my 8340 started leaking oil from around what I presume is the sensor on what I think is the charge filter housing? Luckily I noticed it straight away and was able to stop before too much oil was lost but it does pump it out at quite a rate. The tractor has done 260 hours since I last changed all 3 filters so I would presume that a blocked filter is unlikely. Has anyone experienced this before on 40 series tractors? From the picture you can see where it's leaking from.
Thanks in advance.

 

[multi power]

Looks like leaking sensor to me

 

[Bramble]

Agree with MP, change the sensor

 

[Rs chunk]

Yip change your sensor we had one on our ts115

 

[Farmer mk1]

Our Tm 150 did the same on the pump pressure sensor, we just took it out and put a bolt with some ptfe tape on to keep us working in the silage and it's still there now 12 months later.

 

[horace]

Only the pressure switch, same one on the side of the engine block for engine oil pressure light. Would be very disappointed if your dealer wasn't stocking those.

 

[Steph-a-knee]

Thanks very much for all the replies, at least it's something fairly simple to fix. It does seem a bit daft that a failed sensor can result in so much lost oil though.