FREE COMPRESSOR - When you buy one of these plasma cutters !!!

We are offering for a limited time only a FREE WR3HP-150S Compressor +10m Air Hose with any of the following plasma cutters to TFF members only !!! ......... this is an unbeleivable one time offer so get in quick as it will not be replicated !!!



jasic_cut_60.jpg
£945.00 + VAT
  • 20MM Clean Cut
  • 25MM Severance Cut
  • Lightweight, Portable & Modern Design
  • Variable Cutting Control
  • LED Control Display
  • Simple Operation
  • Smooth Precise Cutting
  • FREE WR3HP-150S +10m Air Hose

aa38bce0-9ce2-4afc-b5be-47a25b88ded4-1.png



Order Here while stocks last - Ends 28th April.

https://www.weldingsuppliesdirect.c...cutter-free-fiac-3-hp-150-ltr-compressor.html


jasic_cut_80.jpg
£1085.00 + VAT


  • 25MM Clean Cut
  • 30MM Severance Cut
  • Lightweight, Portable & Modern Design
  • Variable Cutting Control
  • LED Control Display
  • Simple Operation
  • Smooth Precise Cutting
  • FREE WR3HP-150S +10m Air Hose



aa38bce0-9ce2-4afc-b5be-47a25b88ded4-1.png





Order Here while stocks last - Ends 28th April.

https://www.weldingsuppliesdirect.c...tter-free-fiac-3-hp-150-litre-compressor.html


This is a while stocks last promotion and strictly availiable to TFF members only !!!
 
Location
Shropshire
Hi Bovrill

Plasma's are very clean and easy to use, just make sure that when you choose that you look at THE CLEAN CUT ........ this will give you an accurate indication of your true cut capacity (for instance both machines will cut up to 10 - 20mm very quickly)

Regards

Jonathan
 
Location
Shropshire
If you are interested in this oversubscribed deal .......... call us now to teserve yours (they will be none left towards the end of the week. "WE WILL KEEP YOU UPDATED ABOUT THE STOCK ON A DAILY BAISIS"

Call - 01952 582260

AirProductOffer.png



 

DrWazzock

Member
Arable Farmer
Location
Lincolnshire
Hi Bovrill

Plasma's are very clean and easy to use, just make sure that when you choose that you look at THE CLEAN CUT ........ this will give you an accurate indication of your true cut capacity (for instance both machines will cut up to 10 - 20mm very quickly)

Regards

Jonathan

How do they cope with thick flakes of rust, slaggy arc welds etc? Better than an oxy torch????

I am considering cutting the rotten sheet metal out of the bottom of a dump trailer and replacing it. Oxy torch struggles with rust, cutting disc is slow and cant get in corners.

Just wondered.
 
Location
Shropshire
How do they cope with thick flakes of rust, slaggy arc welds etc? Better than an oxy torch????

I am considering cutting the rotten sheet metal out of the bottom of a dump trailer and replacing it. Oxy torch struggles with rust, cutting disc is slow and cant get in corners.

Just wondered.


How do they cope with thick flakes of rust, slaggy arc welds etc? Better than an oxy torch????

I am considering cutting the rotten sheet metal out of the bottom of a dump trailer and replacing it. Oxy torch struggles with rust, cutting disc is slow and cant get in corners.

Just wondered.

Hi DrWazzock

If you have never used a good plasma ........ you are in for a very big surprise, make shure that the earth return is on a grinded clean bit of metal and then cut away ....... so so simple and clean in comparison with using your gas axe.
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 75 43.6%
  • Up to 25%

    Votes: 61 35.5%
  • 25-50%

    Votes: 27 15.7%
  • 50-75%

    Votes: 3 1.7%
  • 75-100%

    Votes: 3 1.7%
  • 100% I’ve had enough of farming!

    Votes: 3 1.7%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,284
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top