- Location
- east anglia
Looking for inspiration, I would like to put straight discs on a 6m folding subsoiler .This will hopefully cause less disturbance. Has anyone done this ? Answers and pictures much appreciated
Exactly what i want to do to my V-Form, Cousins want £230 per unit, so £690 for my 3 legs!! Anybody recommend a good place to pick up some dowdswell disc units like @nick... above?View attachment 311760 I put a set on my cousins v form.easy job.got some dowdeswell disc assemblys,bit of fab and away you go.saves getting trash in front of the leg and lifting machine out of the ground.
Nick...View attachment 311742
@nick... couple of questions if thats ok? I have got to the fabrication stage with mine now. Got the dowdswell discs, got my metal tube and bits of flat metal ready to go. Your top bits of tubing with the bolt screwed in, is the bolt screwed tight onto the disc arm the only thing holding the disc unit in place? If so what is the handle like bit of metal sticking out the back of the tubing? Also what did you do with the central disc unit of the 3, my subsoiler has a bit of tube welded on by cousins with a threaded hole in it for, I assume, their disc unit to fit, looks like a dowdeswell disc unit will fit in ok to me with a bolt screwed in to hold it in place.View attachment 311760 I put a set on my cousins v form.easy job.got some dowdeswell disc assemblys,bit of fab and away you go.saves getting trash in front of the leg and lifting machine out of the ground.
Nick...View attachment 311742