Front end loader

[Chazzerone]

Hello does anyone know what sort of implants e.g bale spike or buckets would fit on my ALo quickie 2000 loader it looks like this. Cuz I don't know if it is maybe a euro 6 or euro 8 or weather it's completely a different one

 

[Tractortech]

Hello does anyone know what sort of implants e.g bale spike or buckets would fit on my ALo quickie 2000 loader it looks like this. Cuz I don't know if it is maybe a euro 6 or euro 8 or weather it's completely a different one

Now Then..
I imagine it'll only fit Alo / Quicke buckets from when it was new,,,,,, ish.
Personally, I'd get the grinder & welder out and buy a Euro headstock..

 

[SuperTwo]

That's the original type there, someone has modified your crowd ram to get rid of the A frame

 

[Chazzerone]

Now Then..
I imagine it'll only fit Alo / Quicke buckets from when it was new,,,,,, ish.
Personally, I'd get the grinder & welder out and buy a Euro headstock..
View attachment 1053748

How do u rekon I would attach it at the top

 

[Sharpy]

View attachment 1053750
That's the original type there, someone has modified your crowd ram to get rid of the A frame

More likely it was originally a trip loader and someone fitted a ram to make it into a power loader.

 

[Chazzerone]

More likely it was originally a trip loader and someone fitted a ram to make it into a power loader

What Is the main difference ?

 

[Tractortech]

How do u rekon I would attach it at the top

With only a single ram, you'd have to weld / fabricate some structure to stiffen it......... Or, go to the ram shop and get a pair so you can mount one each side ... An interesting sort of job which could cost more than you intend. However, the simplicity of picking up modern Implements would be fantastic..

 

[Bury the Trash]

View attachment 1053750
That's the original type there, someone has modified your crowd ram to get rid of the A frame

that was the same Y or A frame type linkage as on the 2030 the ram worked in a backwards facing direction .
made for a quick action crowd / dump ..... but not with as much force/strength available as twin ram conventional configuration of course.
and it still needed 4 locating pins/point on the implement not 3

 

[David1968]

Be aware adding a euro headstock and moving the implements further forward will reduce the lift capacity.

 

[Sharpy]

What Is the main difference ?

On a trip loader you pull a rope or lever which let's the bucket etc tip to empty, a power loader you have the now standard ability to tilt the implement as you please.