Feldspar
Member
- Location
- Essex, Cambs and Suffolk
Looking for a front weight block of 1t that is as short (due having a small sprayer shed) as possible for a Fastrac with front linkage. Any recommendations please.
Looking for a front weight block of 1t that is as short (due having a small sprayer shed) as possible for a Fastrac with front linkage. Any recommendations please.
The further it sticks out the less weight is needed. The law of the lever.There was a picture on here years ago of a front toolbox, made to go on the link arms when they were folded up. Could you make / get one like that, wide ish. Then would hardly stick out at all.
I half wonder if it was @Chae1 with the pic but might be wrong.
The further it sticks out the less weight is needed. The law of the lever.
Looking for a front weight block of 1t that is as short (due having a small sprayer shed) as possible
Case tractor ones are fairly compactThanks for replies so far. Doesn't need to be absurdly short, but I don't want one of those huge ones with a toolbox on etc.
Case tractor ones are fairly compact
Is it the fendt weight that can be turned either way , to stick out or in between the armsOr fendt, it sits 5 inches in front of linkage pins centres.
We have this for sale came off a case magnum View attachment 824105
John Deere big pack 900kg sit nicely between the link arms .Looking for a front weight block of 1t that is as short (due having a small sprayer shed) as possible for a Fastrac with front linkage. Any recommendations please.
Is it the fendt weight that can be turned either way , to stick out or in between the arms
Have you used it already? Surprised you need a front weight for a trailed sprayerLooking for a front weight block of 1t that is as short (due having a small sprayer shed) as possible for a Fastrac with front linkage. Any recommendations please.
Have you used it already? Surprised you need a front weight for a trailed sprayer
Jcb sell a compact weight. Obviously go steel instead of concrete to reduce size.Just lifted up a mounted cultivator and the front wheels nearly came off the ground. Trailed sprayer puts a lot of weight on the back end.
Fill the tyres with water to start with.
1280kg including the frameHow much weight is it in total?