hilux
Member
- Location
- south Wales
Will they galv rusty metal?
Will they galv rusty metal?
heavy surface rust ok it strips in the acid but takes a little longer ,paint oil and grease will not strip so all need to be removed before sending to galvanizersWill they galv rusty metal?
and they know how to charge for drillingremember any hollow section going to galvanizer has to have all the vent holes correctly drilled or they will charge for each hole they have to drill
Cows muck will strip galvanizing fairly quickly too.thanks for the replies guys. tried painting things before and not had much luck with it near cow muck , so im thinking proper job this time.
I rather think there is galvanising and galvanising. I suspect chassis part are in the dip for a few seconds.Cows muck will strip galvanizing fairly quickly too.
land rover chassis that are galvanized rust where the mud sits.
It's not a permanent coating.
Nah, well galvanised Chassis, besides, does it matter how long it's in the tank for?I rather think there is galvanising and galvanising. I suspect chassis part are in the dip for a few seconds.
BirtleyHow do they work out cost and were do you all go ??
How much they charge, reason i ask i was their yesterday , dropped 1ton off nearly fell through the floor its as dear a fek i tink they have made a mistakeBirtley
Had some there earlier in the year I’ll have to checkHow much they charge, reason i ask i was their yesterday , dropped 1ton off nearly fell through the floor its as dear a fek i tink they have made a mistake
Its a busy place mind eh ! ive spent too much time in scotland, i was born up the road from their couldnt belive how much stuff they have to galvanise fol queing up ! boy infront of me with abouut a million gates lolHad some there earlier in the year I’ll have to check
And that will be a small galvanising plant....I always go early on a Saturday morning as it’s quieterIts a busy place mind eh ! ive spent too much time in scotland, i was born up the road from their couldnt belive how much stuff they have to galvanise fol queing up ! boy infront of me with abouut a million gates lol
Hopefully back sat morn to collect ! £600 ton seems dear to me, i sure she quoted me 300ton afore i left home lolAnd that will be a small galvanising plant....I always go early on a Saturday morning as it’s quieter
I didn’t pay much, I will check the accounts tonight though.....get the wife to ring them and get a price...Hopefully back sat morn to collect ! £600 ton seems dear to me, i sure she quoted me 300ton afore i left home lol
small jig work (stuff that needs hanging with wire on frames to dip) should be about £350 with the zinc surchargeHopefully back sat morn to collect ! £600 ton seems dear to me, i sure she quoted me 300ton afore i left home lol