Galvanising questions

Forever Fendt

Member
Location
Derbyshire
Yes, all holes drilled 8mm holes, all new steel perfectly clean .
Argue about it then,I had some done about 18 months ago there for a job in Berwick and it was about £35 per ton more than we pay down here
Screen Shot 2018-12-12 at 07.36.17.png
thats what the £340 is based on. Here is a picture of a job from a few weeks ago that they fettled by mistake and you can see the grinder marks on the rafters :(
 

Blackleg

Member
Location
Hereford
Newport charged me £650/ton last month for gates/posts

Plus
13.3% zinc surcharge
6% environment surcharge
£3.00 for certificate of conformity

382kg cost £299.22 plus vat
 

mogman

Member
Location
Cheshire
Hiya.Is there a hot dip galv place in the North West-Lancs area.I have a small sprayer I was gonna galv.been painted once over original with Hammerite,failed. Would like to take tank n bits bobs off and sort the frame properly.The band around the middle of it is the worst. Drilled holes in it underneath to let water out,as didn't have any,but still rusting badly.
Any help please.
Thanks.
@Sunshineyday ive used these
https://www.google.co.uk/search?sou....0....1.......5..0j46j35i39j0i131.fIK4LcqRgok
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 80 42.1%
  • Up to 25%

    Votes: 67 35.3%
  • 25-50%

    Votes: 30 15.8%
  • 50-75%

    Votes: 3 1.6%
  • 75-100%

    Votes: 3 1.6%
  • 100% I’ve had enough of farming!

    Votes: 7 3.7%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,294
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top